Publish Time: 2022-05-30 Origin: Site
Most children chairs are placed in the car seat and use the inclined shoulder belt (sometimes only use belt). Different models of cars, however, there are different ways of the seat belt and fixed Car seat shapes are different Belt length is shorter and the anchoring point position is different, can lead to some children seat placed more front or back All of these factors make it difficult to build a child seat for all types of cars and ISOFIX is designed to solve all of these problems. The ultimate goal is to make any ISOFIX child seat you buy fit into your car. You simply plug it into the ISOFIX interface. Rear facing ISOFIX car seat provides a new way to make good safety seats.
Here is the content list:
The points of Rear facing ISOFIX car seat
How to choose a rear facing ISOFIX car seat?
How to set up rear facing ISOFIX car seat?
Basically, fitting points are built into both cars and child car seats when they are manufactured. An ISOFIX child seat is 'plugged' into the corresponding fitting points in the car, removing the need to use the car's seat belts to secure it. An additional top tether or support leg is used to prevent the child seat titling or rotating in an impact.
To find out if your car has ISOFIX points, look for ISOFIX labels between the base and back of your car seats (the fitting points themselves may also be visible) or check your vehicle's handbook or contact the manufacturer or dealer.
To find out if your ISOFIX car seat is approved for your vehicle, check with the child seat manufacturer or retailer; many have a list on their website that shows which seats are approved for which cars. Your car manufacturer may also be able to tell you which ISOFIX child seats fit your car.
When buying a new ISOFIX child seat, take your car to the retailer, if possible, and ask to try the seat out in the car before you buy it.
· Locate the ISOFIX connectors (two prongs sticking out of the back) on the child seat or base.
· Push the connectors into the ISOFIX slots in the car seat. There will be an audible click on many child seats, and/or a visible indicator that turns from red to green, to show that the child seat has been securely attached.
· If using the top tether fixing point, connect the top tether strap to the top tether point in the car. Some have a visible indicator that turns green when they are set correctly Do not attach it to anything else, such as a head restraint or luggage hook as they will not be strong enough.
· If using a child seat with a supporting leg, make sure that the leg is correctly adjusted so the seat is braced against the floor. Some have a visible indicator that turns green when they are set correctly. Make sure the leg is not sitting over an underfloor storage compartment because this may collapse from the force of an impact coming through the support foot.